Découvrez le Ortur Laser Master 15W Personal Laser Engraving Machine en promotion :
Ortur Laser Master 15W Personal Laser Engraving Machine
– 32-bit Motherboard with STM32 chip, more powerful, faster, higher precision. Easy to adjust the speed (0-3,000mm/min) and power (S0-S1,000) for both of engraving and cutting.
– Active position protection, there is a G-sensor on the motherboard for active position protection. If the machine detects unauthorized movement, the laser beam will stop.
– Laser beam safety guard, if your computer system halted, led to that the laser engraver stop moving, the laser beam will stop.
– Exposure limitation, after the laser beam is turned on, but there is no movement for a long time, it will automatically stop. Weak Light Mode: the laser beam automatically stops after 100 seconds. None Weak Light Mode: based on the power level, the laser beam automatically stops within 10 to 60 seconds.
– LaserGRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. and then connect to the laser engraver via LaserGRBL for engraving and cutting.
– This laser engraver supports PWM mode.
– Pre-assembled parts, just need 5-10 minutes to install the machine.
– 160 x 150 mm engraving area.
– Aluminum profile + acrylic materials machine body.
Image format: NC, DXF, BMP, JPG, PNG
Image size: No Limit ( The pixel accuracy could be adjusted freely, and the default is 300 pixels per inch, it’s about 0.81 um pixel precision )
Obtenez plus d’informations sur le Ortur Laser Master 15W Personal Laser Engraving Machine chez notre partenaire.